HORNER HE-XP7E0, Руководство пользователя

Страница: 131 / 192

MAN1106-07-EN_XL+_UserManual
M a y 6
t h
, 2 0 2 0 P a g e 131 | 192
14.6 Beeper Acknowledgement
The XL+ contains an internal beeper that provides an audible acknowledgment when an
operator touches a graphic object that accepts touch input. When the graphic object is enabled,
a short 5ms tone is emitted. When the graphic object is disabled, a longer 100ms tone is emitted
to enounce that graphical object is not currently accepting the touch input.
If beep acknowledgement is not desired, the beeper function can be disabled from the System
Menu.
14.7 Touch (Slip) Sensitivity
Touch
slip
sensitivity is preset to meet most applications; however, adjustment is available to
reduce the sensitivity for touch release. That is, once a graphical object (button) is touched and
held by a finger, the default touch
slip
sensitivity allows for a slight
slip
of the finger on the
graphical object before the XL+ assumes touch has been released (equates to approximately a
quarter inch of movement with a stylus).
In some applications (such as jog buttons) where the operator is pushing a button for a period
of time, the amount of
slip
while holding a button pressed may exceed the default sensitivity.
To increase the amount of tolerable slip and prevent false releases of the button, the XL+ allows
adjustment of the allowable
slide
up to 5x the default value.
To enable the touch (slip) sensitivity, first an OCS data register must be allocated through the
Graphics editor Configuration menu for Display Settings. Once a Touch Sensitivity register is
assigned, that register may be modified [range = 1 (Low) to 5 (High)] to the desired slide amount.
If a value outside the valid range is entered in the touch sensitivity register, it is ignored, and
the last valid value is used.