HornBlasters NATHAN AIRCHIME, Руководство по установке

Страница: 4 / 17

Recommended Tools + Addons
Recommended Tools
Optional Install Items (Not required but will make your install easier)
•
1/2” Wrench
• 9/16” Wrench
• Hole saw (2") [Digital Gauge]
• 1" Adjustable Wrench
• KB1 Mounting Template (included)
•
10mm Wrench or Socket (Air Compressor )
•
12mm Wrench
• Wire Cutter / Stripper / Crimper
•
Teflon Tape
•
Add-a-fuse ®
- Great for tapping into a key-power source from your fuse-box. Can also be used for the horn
activation if your vehicle qualifies.
•
Self-Tapping Screws - These can be used for ground points on the pressure switch, compressor, and valve.
•
Zip Ties ®
- Used to keep your air line looking clean and organized. Handy for the runs of wire too.
•
Heat Shrink Tubing
- Can be used over the terminal connectors to better seal them up against the
elements.
•
Loctite 545 Thread Sealant - Can be used instead of Teflon to seal fittings.
Hardware Specifications
• K5LA Hardware
o
Bell to Manifold

3/8"-16 x 1-1/2" Bolt
o
Bell Back-cap

1/4"-20 x 7/8" Bolt
o
K5LA Horn to Mounting Pedestal

3/8"-16 x 1-1/2" Bolt
•
Compressor Hardware
o
Compressor Mounting Hardware

#10-32 x 1" Bolt (A longer bolt can be used)
o
Compressor Mounting Bracket (bolts used to mount to vehicle)

3/8"-16 x 1-1/2" Bolt
To get started on the assembly process for this kit, locate the 5 horn bells and manifold for the K5LA. The bells
can be installed onto the manifold in any orientation of your choice. All 5 bells can be mounted facing forward, or
with a combination of 2 facing backward and 3 facing forward. It's entirely up to you. The next page will detail
how the hardware is used to assemble the bells to the manifold.
Page 4