Horizon Signal SQ2, Руководство пользователя, Страница: 19 / 30

WI-0055: SQ2 User Manual Version 1.0 19
Horizon Signal SQ2 User Manual
Compatibility Operation
Multi-Signal 2.0 controllers can be used in conjunction with previous generation Multi-Signal 1.0 controllers in
Compatibility Operation. When operating in this mode, all controllers are limited to the capabilities of the MS 1.0
system. Follow the steps below to enter Compatibility Mode:
Compatibility 4.0.41
Configure Radio
Read: - - -
Radio Type Remote
Channel
11
Baudrate 19200
Read
1. With the MS 2.0 controller powered OFF, flip the Operation Selector Switch to
the right position to select Compatibility Operation.
2. Power MS 2.0 controller back ON.
3. To use the 2.0 PTS Programmer:
Plug in the PTS Programmer. When the Horizon Signal Logo Screen appears,
press “R” and “E” buttons at the same time. The title heading of the screen will
change to say “Compatibility” and the software version. (Press “R+E” again to go
back to Enhanced Mode for systems with exclusively MS 2.0 controllers).
4. To use MS 1.0 Micro-Terminal:
MS 1.0 Micro-Terminals may be used on MS 2.0 controllers operating in
Compatibility Mode. There is no need to change the mode of the Micro-Terminal
just plug and play.
Systems running in Compatibility Operation must have all radios set to a Baud
rate of 19200. (Enhanced Mode must be set to 57600). Follow the steps on Page
12 to set radio parameters. Micro-Terminals will always automatically use a
Baud rate of 19200 therefore cannot be used on MS 2.0 in Enhanced operation.
Note: the PTS Programmer’s radio “Read” function is still available in
Compatibility Operation.
You can now enter a program as normal. Keep in mind that you are limited to the features and functions of
the previous generation operating system while in Compatibility Operation.
To return to Enhanced Operation, make sure to flip the Operation Selector Switch back to the UP position then
cycle the controllers power. Next confirm that your PTS Programmer is not in “Compatibility” Mode (step 3
above). You will also need to adjust your radio Baud rate back to 57600.