Horizon Hobby Carbon-Z T-28, Быстрое руководство

Страница: 3 / 14

SAFE
®
Select Technology, Optional Flight Envelope Protection
®
EN
3
®
Control Throws
AS3X Control Direction Test
NOTICE: If control throws are changed from the factory settings, the AR636 gain
values may need to be adjusted. Refer to the Spektrum AR636 manual for adjust-
ment of gain values.
After fl ying, you may choose to adjust the linkage positions for the desired control
response. See the table at the right.
This test ensures that the AS3X ® control system is functioning properly. Assemble
the aircraft and bind your transmitter to the receiver before performing this test.
Airplane should be bound in AS3X mode or should bound in Safe Select mode with
a switch assigned and in the AS3X position
1. Raise the throttle just above 25%, then lower the throttle to
activate AS3X technology.
CAUTION: Keep all body parts, hair and loose clothing away from a
moving propeller, as these items could become entangled.
2. Move the entire aircraft as shown and ensure the control surfaces move in
the direction indicated in the graphic. If the control surfaces do not respond
as shown, do not fl y the aircraft. Refer to the receiver manual for more
information.
Once the AS3X system is active, control surfaces may move rapidly. This is normal.
AS3X remains active until the battery is disconnected.
During your fi rst fl ight, trim the aircraft for level fl ight at 3/4 throttle with fl aps and
gear up. Make small trim adjustments with your transmitter’s trim switches to
straighten the aircraft’s fl ight path.
After adjusting trim do not touch the control sticks for 3 seconds. This allows the
receiver to learn the correct settings to optimize AS3X performance.
Failure to do so could affect fl ight performance.
3 Seconds
In Flight Trimming
Tuning Horns Arms
More control throw
Less control throw
Aircraft
movement
AS3X Reaction
Elev
ator
Aileron
Rudder