Horizon Fitness TORUS 4, Руководство пользователя

Страница: 6 / 17

10 11
NYLON NUT (C)
Qty: 1 FLAT WASHER (B)
Qty: 2
BOLT (G)
Qty: 1 NYLON NUT (C)
Qty: 2
FLAT WASHER (B)
Qty: 4 BOLT (A)
Qty: 2
SCREW (F)
Qty: 4
ASSEMBLY STEP 3
A Open HARDWARE BAG 2 .
B Attach SEAT WELDMENT SET .
C Attach COVER to bolted joint using 4 SCREWS (F) .
D Remove STOPPER from front side of RADIAL ARM
ASSEMBLY
and reinstall on back side of
RADIAL
ARM ASSMBLY . Attach RADIAL ARM ASSEMBLY
to CENTER SUPPORT FRAME using 2 BOLTS (A) , 4
FLAT WASHER (B) and 2 NYLON NUT (C) .
HARDWARE BAG 2 CONTENTS:
ASSEMBLY STEP 4
A Open
HARDWARE BAG 3
.
B Attach LEG ExTENSION/CURL DOWN TUBE
to SEAT ASSEMBLY using 1 BOLT (G) , 2 FLAT
WASHERS (B) and 1 NYLON NUT (C) .
NOTE: Position the LEG ExTENSION/CURL DOWN
TUBE so the cable attachment is facing the gym.
C Insert
SEAT SET SAFETY PIN
.
HARDWARE BAG 3 CONTENTS:
RADIAL ARM
ASSEMBLY
NYLON NUT (C)
FLAT WASHER (B)
FLAT WASHER (B)
BOLT (A)
SEAT WELDMENT SET
FRONT COVER
BACK COVER
SCREW (F)
RADIAL ARM ASSEMBLY
STOPPER
STEP 3-D: INSTALLING THE STOPPER:
SEAT SET SAFETY PIN
FLAT WASHER (B)
SEAT WELDMENT SET
NYLON NUT (C)
BOLT (G)
FLAT WASHER (B)
CENTER SUPPORT FRAME
LEG EXTENSION/
CURL DOWN TUBE
CABLE ATTACHMENT