14
15
CABLE B
Qty: 1
CABLE A
Qty: 1
ASSEMBLY
STEP 7
A Open
HARDWARE BAG 6
.
B Remove nylon nut and threaded screw from end of
CABLE A
.
C Insert cable end into
LAT BAR ASSEMBLY BRACKET
pulley as shown in diagram.
NOTE:
After passing through second pulley bracket,
DUAL FLOATING PULLEY BRACKET
must be installed.
D Re-install threaded screw and nylon nut before threading
cable into
TOP WEIGHT PLATE
.
NOTE:
Always maintain at least ½˝ of weight cable screw
in
TOP WEIGHT PLATE
for saftey.
E Hook
LAT BAR
on to cable using the
HOOK
and rest in
craddle.
HARDWARE BAG 6 CONTENTS:
HARDWARE BAG 7 CONTENTS:
ASSEMBLY
STEP 8
A Open
HARDWARE BAG 7
.
B Remove nylon nut, threaded screw and ball from end of
CABLE B
.
C Route
CABLE B
through the pulley system in the
RADIAL ARM ASSEMBLY
as shown in diagram.
D After
CABLE B
routing is complete replace nylon nut,
threaded screw and ball on end of cable.
E Hook
HANDLES
on to cable using the 2
HOOKS
.
CABLE A
RUBBER STOP
BALL
NYLON NUT (C)
FLAT WASHER (B)
LAT BAR / WEIGHT
CABLE SCREW AND NUT
TOP WEIGHT
THREAD
HOOK
CLEVIS
FLAT WASHER (B)
SCREW (E)
LAT BAR
DUAL FLOATING
PULLEY BRACKET
RUBBER STOP
BALL
NYLON NUT (C)
FLAT WASHER (B)
CABLE B
GRIP
HOOK
CLEVIS
FLAT WASHER (B)
SCREW (E)
