16
17
FLAT WASHER (M)
Qty: 12
SCREW (L)
Qty: 12
CABLE C
Qty: 1
ASSEMBLY
STEP 9
A Open
HARDWARE BAG 8
.
B Remove nylon nut, threaded screw and ball from end of
CABLE C
.
C Attach threaded cable end to
SINGLE FLOATING
PULLEY BRACKET
.
D Route
CABLE C
through pulley system of
BASE FRAME
up through the
DUAL FLOATING PULLEY BRACKET
and back to
BASE FRAME
and
CENTER SUPPORT
FRAME
as shown in diagram.
E After
CABLE C
routing is complete replace nylon nut,
threaded screw and ball on end of cable.
F Hook the
LEG EXTENSION/CURL DOWN TUBE
to the end of the cable using the
HOOK
and the
EXTENSION CABLE
.
HARDWARE BAG 8 CONTENTS:
HARDWARE BAG 9 CONTENTS:
ASSEMBLY
STEP 10
A Open
HARDWARE BAG 9
.
B Install
WEIGHT SHROUDS
as shown in diagram, using
12
SCREWS (L)
and 12
FLAT WASHERS (M)
.
RUBBER STOP
BALL
NYLON
NUT (C)
FLAT WASHER (B)
HOOK
EXTENSION CABLE
LEG EXTENSION/
CURL DOWN TUBE
CABLE SCREW
SINGLE FLOATING
PULLEY BRACKET
CLEVIS
FLAT WASHER (B)
SCREW (E)
CABLE C
RIGHT SHROUD
SCREW (L)
FLAT WASHER (M)
SCREW (L)
FLAT WASHER (M)
LEFT SHROUD
BACK SHROUD
