5
ASSEMBLY
Before proceeding, find your home gym’s serial number and model name located on the
left rear side of the base frame and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
SERIAL NUMBER:
MODEL NAME:
HORIzON
WARNING
SERIAL NUMBER LOCATION
IMPORTANT:
READ THESE SAFETY INSTRUCTIONS BEFORE USE!
During the assembly process there are several areas that special attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the
home gym could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be
no side-to-side play in the frame uprights. If there is any play in these areas, the home gym has not been properly assembled. To
prevent damage to the home gym, the assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Place the home gym carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take
CAUTION when handling and transporting this unit. Never open box when it is on its side. Unpack the unit where it will be used.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
