4
5
READING RACK
GRIP PULSE HANDRAILS
WATER BOTTLE HOLDER
ON/OFF SWITCH
CIRCUIT BREAKER
TRANSPORT WHEEL
POWER CORD
CONSOLE
SAFETY KEY PLACEMENT
RUNNING BELT / RUNNING DECK
SIDE RAIL
ROLLER END CAP
REAR ROLLER
ADJUSTMENT BOLTS
CONSOLE MAST
MOTOR COVER
FOOT LOCK LATCH (UNDERNEATH DECK)
TOUCH PAD PANEL AND DISPLAY WINDOWS
SIDE HANDRAILS
SIDERAIL SLEEVES
ALL
MoDELS
TooLS INCLUDED:
F
5 mm T-Wrench
F
Screw Driver
PARTS INCLUDED:
F
1 Console Assembly
F
2 Console Masts
F
3 Hardware Bags
F
1 Safety Key
F
1 Bottle of Silicone Lubricant
(for 2 applications)
F
1 Power Cord
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill
from packaging until specified to do so in the assembly instructions. You may
remove the plastic wrap from console masts.
WARNING
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a
protective covering on your floor. Take CAUTION when handling and transporting this
unit. Never open box when it is on its side. Once the banding straps have been removed,
do not lift or transport this unit unless it is fully assembled and in the upright folded
position, with the lock latch secure. Unpack the unit where it will be used. The enclosed
treadmill is equipped with high-pressure shocks and may spring open if mishandled.
Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
such as lithium bike grease is recommended.
PRE
ASSEMBLY
ALL
MoDELS
