FG8101G01
Technical Documentation
Page 21 of 49
Version: 01.02; Date: 18.11.2022
For POS1 and POS 5, the board must be placed on the guides of the isolation plate and
then inserted into FG8101G01 (in Figure 6, the guides of the isolation plate on which the
board must be placed are marked).
Figure 6
Note
Extension board rotation
For POS5 to POS8 the extension boards must be inserted rotated into the
FG8101G01, i.e. the writing on the bezel of the extension board must be
upside down for these positions.
After the extension board has been inserted into the FG8101G01, the extension board
must be fixed against the FG8101G01 with the screws on the cover and then cables can
be connected to the extension board.
CAUTION
Connect cable to extension board
Cables may only be connected to the extension boards after the boards have
been mounted in the FG8101G01, otherwise an electric shock or a defect of
the extension board may occur.
