FG8101G01
Technical Documentation
Page 22 of 49
Version: 01.02; Date: 18.11.2022
9.2
Dismounting of extension boards
To remove an extension board from the FG8101G01, all cables must first be disconnected
from the corresponding extension board.
CAUTION
Disconnect cable from extension board
All cables must be disconnected from an extension board before
disassembling it, otherwise an electric shock or a defect of the extension
board may occur.
After that, the captive screws of the extension board cover must be unscrewed of the
FG8101G01, then the extension board can be pulled out of the FG8101G01.
DANGER
Electric Shock
PSU extension boards must not be pulled out of the FG8101G01 immediately
after disconnecting the cables. Wait at least one minute between unplugging
the cables and pulling out the PSU extension board.
WARNING
Risk of Burns
During operation, high device temperatures may occur depending on the
operating parameters and system configuration.
Allow the device to cool down first before starting maintenance work.
Finally, either a blind cover or another extension board must be mounted to the open
position in the FG8101G01 of the dismantled extension board.
