hopf FG8101G01, Техническая документация инструкция

Страница: 39 / 49

FG8101G01
Technical Documentation
Page 39 of 49 Version: 01.02; Date: 18.11.2022
11 Maintenance
No special maintenance is required for the FG8101G01 system.
If you detect a malfunction, follow the instructions in the corresponding chapters for
troubleshooting or contact the
hopf
Elektronik GmbH -Support.
12 Troubleshooting
12.1 Procedure
If the device reports an error, then
hopf
Elektronik GmbH recommends proceeding as
follows:

If there is no light emitting diode on the device and no display activity (pressing the
button), check whether the supply voltage is sufficient and the polarity is correct at
the corresponding terminals.

If the device displays a fault via the red error LED, look in the corresponding menu
of the extension boards for the cause of the fault.
The device / extension board is ready for operation when:

According to the functional description of the respective extension board, the
operational readiness is signalled via the three LEDs in each board front
panel.

A red LED usually indicates limited functionality, while the green and yellow
LEDs signal that the device is ready for operation.

The exact function description of the LEDs can be found in the
corresponding menu of the respective extension board.