S
YSTEM
P
ARAMETERIZATION AND
O
PERATION
46 / 98
6842 GPS Slim Line System - V09.01
hopf
Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
When
Y
is pressed the mode that is currently set appears on the display.
For the Position-fix evaluation this is:
Display frame:
A C T . I S P O S . F I X
STANDARD Value: POS.FIX
F O R 3 - D P U S H +
The evaluation can be changed to 3D with the
+
sign.
The following frame appears for 3D evaluation:
Display frame:
A C T . I S 3 - D F O R
P O S . F I X P U S H -
The evaluation can be changed to Position-fix with the
-
sign.
4.1.4.5 Program Reset
This function triggers a software reset of the System 6842 Control Board. All other Function
Boards in the System continue to run (except Function Boards without their own processor).
This function has no effect on the failsafe-stored data.
Program Reset is triggered via the following frame:
Selection frame:
P R O G R A M M R E S E T
Y / N _
P
rogram
R
eset is executed by pressing the
Y
key.
4.1.4.6 Master Reset
This function triggers a hardware reset of the whole System 6842. All Function Boards
present in the System 6842 are reset and restarted.
This function has no effect on the failsafe-stored data.
Selection is made via the following frame:
Selection frame:
M A S T E R R E S E T
Y / N _
M
aster
R
eset is executed by pressing the
Y
key.
