S
YSTEM
P
ARAMETERIZATION AND
O
PERATION
6842 GPS Slim Line System - V09.01
39 / 98
hopf
Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
4.1.2.6 LAN Board Parameters (Option)
Further information and an explanation of the parameters can be found in the description of
the LAN Board.
4.1.2.6.1 Display Frames for LAN Board 1 Parameters
The configuration of the LAN Board coded as Board 1 (if present in the System) is displayed
on this display frame.
IP Address Displays
Selection frame:
S H O W L A N 1
A D R . Y / N _
Display frame:
L A N 1 > 1 9 2 . 1 6 8 .
0 0 1 . 0 1 0 <
Always the last inputted IP address
by keypad
is displayed. If the
IP address is changed by Telnet or via serial interface of the LAN board it
will be displayed, too.
Gateway Address Displays
Selection frame:
S H O W L A N 1
G A T E W A Y A D R . Y / N
Display frame:
G . W 1 > 1 9 2 . 1 6 8 .
0 0 1 . 0 0 5 <
Network Mask Displays
Selection frame:
S H O W L A N 1
N E T - M A S K Y / N _
Display frame:
N E T - M A S K L A N 1
> 2 4 < _
Control Byte Displays
Selection frame:
S H O W L A N 1
C N T R L . - B Y T E Y / N
Display frame:
B I T 7 6 5 4 3 2 1 0
1 0 1 0 0 0 0 1 _
4.1.2.6.2 Display Frames for LAN Board 2 Parameters
The configuration of the LAN Board coded as Board 2 (if present in the System) is displayed
on this display frame.
The LAN Board 2 parameters are displayed in the same way as for LAN Board 1.
