18
ASSEMBLY
EN
5. Finish inflating the tubes. The recommended inflation pressure is 0.25 bar.
6. Close the valves by fitting their caps in order to ensure optimal airtightness.
7. Secure the oars [5] on the oarlocks [7] if rowing or in the boat using the oar ties for storage when
power boating.
Do not use a compressed air source (ex.: air compressor) to inflate the boat. Over inflation
may cause the seams and/or walls themselves to rupture.
MODELS T24IE, T27IE, T32IE, T38IE (inflatable air decks)
CAUTION:
• Carefully clean the assembly surface and remove all sharp or pointed objects.
• In case of use at high altitude: if the boat was initially inflated at sea level, then transported to a higher altitude (mountain lake,
for example), the pressure inside the chambers will have increased. Adjust the pressure before boating.
• Check the inflation pressure using the pressure gauge supplied with your boat prior to each use.
• Check tightness of valves regularly with tool provided.
1. Unfold the boat on a flat, clean surface.
2. Check that the valves [1] are in place. Check that they all have their cap [2] held by a retainer [3].
B16
