Hongqi HS5, Руководство пользователя

Страница: 141 / 400

4.3. Operating lights and wipers
139
4
Driv
in
g

Under the following circumstances, the system may not be able to accurately detect the ambient brightness
level, which may cause the intelligent high-beam control system not to work properly. In this case, please
switch between high beam and dipped beam manually.
● The rain & lamp sensor or the camera of advanced driver assistance system fails.
● The windshield is blurred by moisture, ice, dirt, etc.
● The windshield is cracked or damaged.
● When the sight ahead is not clear due to fog, heavy rain, snow, etc.
● The camera is deformed or dirty.
● The camera temperature is extremely high.
● The ambient brightness is equivalent to the brightness of the headlamp, tail lamp or fog lamp.
● Headlamps or tail lamps of the front vehicle are off, dirty, decolored, incorrect in alignment, or there is only
one bulb working.
● When driving through an area with intermittent changes in brightness.
● Frequent or repeated driving on uphill and downhill roads, bumpy roads or uneven roads (e.g. stone paved
roads, gravel roads, etc.).
● Frequent or repeated turning operations or driving on winding roads.
● There is a highly reflective object, such as a sign or mirror, in front of the vehicle.
● The back of the vehicle in front is highly reflective, such as a container on a truck.
● The headlamp of the vehicle is damaged, dirty, or misaligned.
● When the opposite car turns off its headlamps and turns on the fog lamps.
● The vehicle tilts due to flat tires, towing a trailer, etc.
● The high beam and the dipped beam are repeatedly switched in an abnormal way.
● In front of the vehicle there is a light which is similar to the headlights or taillights.
● When there is lamp reflection on the road such as wet, snow and ice roads.
CAUTIONS

Limitations of automatic high beam
Don't rely on automatic high beam. Be sure to drive safely and observe the surrounding environment. If
necessary, turn the high beam on or off manually.