Hongqi HS5, Руководство пользователя

Страница: 111 / 400

3.5. Opening and Closing Windows
109
3
Op
era
tin
g th
e Co
m
po
ne
nts

Operating condition for sunroof
The engine switch is in IG-ON mode.

Initialization
● Sunroof initialisation
Initialization is required when the sunroof position is incorrect, the sunroof automatic function fails or the
panoramic sunroof and sun visor linkage function fails. The initialization steps are as follows: place the engine
switch in "IG-ON" mode, and the sunroof will be fully closed. Press the sunroof switch forward for about 7s
(seconds) at this time, release the switch after the sunroof hits the blocking point of the mechanism, press the
switch forward again within 5s (seconds), and the sunroof will perform a series of actions such as tilt up, slide
open, slide close, and then stop. Release the switch, and the initialization operation is completed.
● Sunshade curtain initialisation
Initialization is required when the position of the sun visor is incorrect or the automatic function of the sun
visor is invalid. The initialization steps are as follows: put the engine switch in "IG-ON" mode, and the sun
visor will be fully closed. At this time, press the sun visor button for about 7s (seconds), release the switch
after the sun visor hits the blocking point of the mechanism, press the switch again within 5s (seconds), and
the sun visor will move backward and forward and then stop after a series of actions. Release the switch, and
the initialization operation is completed.
■
Anti-pinching function
If the sunroof/sunshade curtain encounters obstacles during closing, the sunroof/sunshade curtain will
automatically return to a safe position.
■ Automatic sunroof closing function *
When the engine switch is placed in "IG-OFF" mode and the sunroof is not closed, the sunroof is closed
automatically by judging the rainfall amount through the rain and light sensor.
■
Closing the sunroof with remote control
When all doors, the hood and the trunk lid are closed and the engine switch is set to the "IG-OFF" mode, in
the effective area, press the lock button on the smart key and hold to close the sunroof.
■ Closing the sunroof with the smart key
When all doors, the hood and the trunk lid are closed and the engine switch is set to the "IG-OFF" mode, and
you carry a smart key or card key with you, you can close the sunroof by touching the door handle locking
sensing area for a period of time.
■ Closing the sunroof with the mechanical key
When all doors, the hood and the trunk lid are closed and the engine switch is set to the "IG-OFF" mode, the
sunroof can be closed by locking the doors with a mechanical key.