Hongqi HS5, Руководство пользователя

Страница: 279 / 400

6.1. Using the A/C System
277
6
In
terio
r Eq
uip
m
en
t
ADS anti-fog sensor
At the running state of air conditioner, when the windshield has a fogging tendency, A/C system will enter the
automatic anti-fogging mode, and the air volume will be appropriately increased and blow towards the
windshield; when the tendency is eliminated, A/C system will automatically switch back to the operating state
before its anti-fogging control. After entering the automatic anti-fogging mode, you can exit the automatic
anti-fogging mode by operating AUTO button or air outlet mode adjusting button. If the fogging tendency of
windshield can’t be eliminated after a period of time, the system will restart the mode.
Tips:
After entering the automatic defogging mode, A/C system will have a large air volume; in the event of heavy
rain, rainstorm or other bad weather, in order to achieve rapid defogging effect, it’s recommended to start the
forced defrosting/defogging function of windshield.
Natural ventilation function
Touch the natural ventilation button on the multimedia display to enter the natural ventilation mode, and its
intake mode is switched to external circulation. At this time, the compressor stops working to save the energy.
Ion purification
After touching the ion-purifying button on A/C
operating interface of multimedia display, the button
lights up, the ion purification function is turned on, the
touch is turned on again, the button is turned off, and the
ion purification function stops.
The system has two purification modes, namely the sterilization operating mode and negative ion operating
mode. The car switches automatically between these two modes during the operation of system. When the
blower fails to work, the air purifier can’t work even if the air purifying function is activated.
PM2.5 sensor
After touching [PM2.5] button on the multimedia
display, the button lights up, and PM2.5 concentration
of air inside the car is detected. When the detection is
completed, if the concentration reaches the standard, the
system will automatically exit;if not, the system will
automatically start filtering and exit after the filtration is
completed.
Pres and hold the [PM2.5] button to turn on the PM2.5
filtering function. Hold [PM2.5] button to enable forced
PM2.5 filtration function.