– 14 –
iii. Program the selected user code assigned in the panel; refer to
Door Lock
User Guide
.
The screen displays a series of messages:
“
Please press function key on device”
“Adding Slave Unit:
“Adding to Security Network”
Do not use any garage door automation with any garage door
opener that lacks the safety features required by U.S. federal
safety standards (this includes any garage door opener model
manufactured before January 1, 1993). A garage door opener
that cannot detect an object and stop and reverse the door –
does not meet current U.S. federal safety standards. Your
garage door opener also must signal before unattended door
operation. For more information please consult your garage
door opener manual.
UL
Access control functionality has not been evaluated by UL
and may not be used in UL Listed applications.
C. Honeywell Thermostat
Have a professional HVAC contractor install the Honeywell
Thermostat according to the manufacturer’s instructions. The device
should be mounted in the final location and tested before adding it to
the system.
NOTES:
•
Honeywell is not responsible for property damages due to
improper setting of the thermostat modes, or improper wiring if
not installed by a qualified technician
•
If installing another brand of thermostat, follow the instructions in
the User Guide for that specific thermostat to include properly into
the Z-Wave network.
•
If not using a Honeywell thermostat, enrollment procedure may
vary. Refer to the thermostat instructions for enrollment
procedure.
i. Perform steps 1 & 2 above.
ii.. At the Z-Wave thermostat:
a) Select
Thermostat
;
set Time/Date.
b) Follow the instructions in the thermostat Installation Guide for
“Z-Wave enrollment”.
c) To complete inclusion, Click
Done
.
d) Click
Exit
to return to normal operation.