Honeywell Tuxedo Touch Series Скачать руководство пользователя страница 6

Страница: 6 / 48

About the System (cont'd)

About Your Home Screen

Your "Home" screen is the gateway to your System. From this screen you can:

•

control your security system

•

control your multi-media applications such as video, pictures and cameras

•

control home automation such as lighting, thermostat, and door locks.

Your "Home" screen is displayed most of the time and can be customized via the
Multi-Media Application.

Multi-Media Application

The Picture/Video (Audio) features allow you to display personal photos (in a slide show format), and view video files via the

external SD/SDHC card.
It is recommended that you use the SD/SDHC

card supplied with the keypad.

In everyday handling, memory cards can become susceptible to malfunction and/or failure due to electrostatic discharges and the

information on the card may be lost. In some extreme cases, the keypad may need to be reset.

NOTE: Honeywell is not responsible for any loss of personal information (files, videos, photos, etc.)

The background and icons shown on the “Home” screen in this manual are for example only. Your system installer may have

changed the actual background and icons shown on your “Home” screen.

Memory Card Insertion

Insert the memory card (SD/SDHC Card) as shown.

Tips for proper memory card handling:

•

Avoid touching the contacts on the card

•

Quit the slide show/video application before removing the memory card.

6280-004-V0

INSERT

CARD

Weather Forecast

The Weather forecast is displayed on the “Home” screen. To set the weather forecast for a specific location,

press on the “Weather” feature. Select

USA, Canada

Others

. Select

Zip Code

Postal Code

and enter the

information on the data entry keyboard or press

Country/City

and select from the drop down list. Weather

conditions for that location are displayed.

Note:

The Weather option must be enabled, see Weather Display

Enable/Disable below.

Weather Display Enable/Disable

The weather feature can be completely disabled if Tuxedo Touch is

used in an area not supported by the weather service or the user does not want to see weather on the Home

screen. From the

Home

screen, press

Setup

System Setup

CS Setup

and enter your Authorized code.

Press the

Options

icon. Select the

Weather Forecast

option to turn the feature

Off

and press

Apply

38 F

47 F

43 F

High

Low

Melville, NY

Temp.

Содержание Tuxedo Touch Series
















































Результаты поиска

Содержание Tuxedo Touch Series

Отзывы:

Похожие инструкции для Tuxedo Touch Series

Бренды по названию

Популярные бренды

Honeywell Tuxedo Touch Series, Руководство пользователя

Результаты поиска

Содержание Tuxedo Touch Series

Отзывы:

Похожие инструкции для Tuxedo Touch Series

Бренды по названию

Популярные бренды