Multi-Media (cont'd)
25
ICON ACTION
NOTES
5. Press the
Add
icon (if the camera information is
not automatically obtained), to manually enter
information.
6. To edit camera information, highlight the
camera name and press the
Edit
icon. Highlight
each field and enter the required information.
a) To retrieve camera settings and connect to the
camera, press the
Connect
icon or,
b) Press the
Total Connect
icon to reset the
camera for remote viewing and activate a Total
Connect account.
c) Use the
Refresh
icon to update the screen.
d) Press
Reset
to reset the camera to factory
default. Select
Yes
or
No
.
7. When all cameras have been added, press the
Wireless Settings
icon to enter the wireless
information from your router.
8. Press the
Apply to All
button to set cameras to
wireless operation
Use the Data Entry Keyboard to enter the required information.
•
Use
the
Shift key for capital letters
•
Use
the
BS (Backspace) key to make corrections.
Press the Clear icon to clear the camera list.
On the ‘Add Camera’ screen enter (Name, User, RTSP Path,
Resolution, Frame Rate, Address, Password, RTSP Port, HTTP
Port) if known.
On the ‘Camera Configuration’ screen enter the appropriate
information: (Name, Model, User, RTSP Path, Resolution, Frame
Rate, Address, Password, RTSP Port, HTTP Port) if known.
Enter the appropriate Wireless Settings: SSID, Network Type,
Channel No., Security System, Authentication Type, WEP Encrypt,
Pass Phrase and WEP Key, if applicable.
For WPA PSK TKIP, WPA PSK, AES, and WPA2 PSK AES, enter the
Shared Key using the Data Entry keyboard and press OK.
A pop-up window displays “cam (name) wireless set OK”, if
successful. Or, “cam (name) wireless set Failed”.
Remove the Ethernet cable from the wireless cameras to view
wirelessly via the Tuxedo Touch Keypad. If the camera does not have
wireless capability, leave it connected to router.
Setup Icons
Camera Icons
Play
Scan
Add
Delete
Clear
Clear
Edit
Refresh
Stop
Auto Pan
Quad View
Full View
Pan/Tilt
Back
Notes:
•
To use the Pan/Tilt feature in Quad View, select the camera name from the camera list and then press Pan/Tilt.
•
Press
the
Quad View icon to enter quad mode. Select a quadrant area on the screen (this area is highlighted) and then select the camera that you
want to appear in that quadrant.
UL
Camera functionality is supplementary only and has not been evaluated by UL.
