Honeywell Tuxedo Touch Series Скачать руководство пользователя

Страница: 29 / 48

User Setup (cont'd)

Time/Date Setup

You can set the time and date from the

Set Time & Date

screen.

•

When the time is set it is stored in the keypad and sent to the control panel when you press the

Apply

icon and answer

Yes

the following prompt. Additionally, when using the keypad, the panel may download its time into the keypad periodically after

the clock is set (for Vista residential and newer commercial panels such as Vista 128BPT).

•

Get Time

is pressed, the keypad downloads the time and date from the control panel and exits the Set Time & Date screen.

Note:

This icon (

) appears with residential panels and may not appear with all commercial panels.

Setting Daylight Savings Time

To set the daylight savings time, do the following:

ICON ACTION

NOTES

1. From the “Home” screen, press the

Setup

and

System

Setup

icons.

2. Press the

Time/Date Setup

icon; enter an Authorized Code.

3. Press the

DST

icon if you want daylight savings time to

affect your system clock.

If DST On is selected, the keypad adjusts for Daylight
Savings time at the month, week and time chosen

4. Set the “Start DST” time and then the “End DST” time by

pressing the

Month

Weekend

and

Hour

that you want

DST to start.

5. APPLY

saves the settings.

Make sure "DST On” is checked to enable this feature.

Setting Current Time and Date

To set the current time, do the following:

ICON ACTION

NOTES

1. Press the

Time/Date Setup

icon; enter an Authorized Code.

2. Press the

Month

"arrow"; and select the current month.

Press the

Year

that is being displayed and enter the

current year.

4. Press the

Hour

that is being displayed and enter the

current hour.

5. Press the

Minutes

that is being displayed and enter the

current minute.

6. Press

(Each depression switches the AM/PM display).

7. Press the

MMDDYY

“arrow”, and select a format for which

you want the year to be displayed.

8. Press

Apply

After each selection the window closes automatically and
the selection is displayed.

Select if you want a 12-hour or 24-hour format for your
time display by pressing the circle to the left of the 12 Hour
display.

A confirmation screen is displays:

“Time Setting Confirmation

Set time on the security system as well?”

Yes or No

Yes saves the time changes in your security system.
No saves the changes to the keypad only.

Note: A Yes response is recommended.

Содержание Tuxedo Touch Series
















































Результаты поиска

Содержание Tuxedo Touch Series

Отзывы:

Похожие инструкции для Tuxedo Touch Series

Бренды по названию

Популярные бренды

Honeywell Tuxedo Touch Series, Руководство пользователя

Результаты поиска

Содержание Tuxedo Touch Series

Отзывы:

Похожие инструкции для Tuxedo Touch Series

Бренды по названию

Популярные бренды