Setup (cont'd)
21
Fixed IP Addresses
If the IP Address is not displayed in the lower left-hand corner on the Tuxedo Touch Keypad “Home” screen, you may require a
“Static”
(Fixed) IP Address
that can be found by accessing your router. Refer to your router instructions for further information.
To access “IP Setup”, do the following:
ICON ACTION
NOTES
1. At the Tuxedo Touch Keypad:
a) Press the
Setup
icon and then press the
IP Setup
icon.
b
)
Press the button next to
Obtain an IP address
automatically
to de-select it and manually
enter the desired IP Address you want to
assign to the keypad.
c) Enter the “IP Address” by pressing the first set
of 3 zeros (“000”) on the screen, and enter the
first three numbers of the IP address on the
“Data Entry Keyboard”. Repeat this step until
the complete address has been entered and
press
Apply.
2. At your PC, Smart Phone or Tablet Browser:
a)
Start your browser and enter your IP Address.
Refer to “Automatic IP Addresses” Step 2 on previous
page.
Use the Data Entry Keyboard to enter the required information.
•
Use
the
Shift key for capital letters
•
Use
the
BS (Backspace) key to make corrections.
•
Press
OK
A pop-up window displays the message:
Settings Changed! Remember new settings?
Select Yes to save the settings.
Select No to cancel.
Account Setup
Account setup provides a browser log-on page for each user (for higher security) when viewing from a web enabled device or PC on
a different sub-net.
To set up a user account, do the following:
ICON ACTION
NOTES
To set up a
User Account
:
1. Press the
Account Setup
button.
2. Press the User Name field and enter a user name
on the “Data Entry Keyboard”; press
O
K
.
3. Press the “User Password” field and enter a user
password; press
OK
.
4. Press the
Save
icon; the new user is displayed on
the screen.
5. Press
Apply.
6. To delete a user, press the
Delete
button next to
that user’s information.
Note: Account Setup allows you to add up to 5 users.
Use the Data Entry Keyboard to enter the required information.
•
Use
the
Shift key for capital letters
•
Use
the
BS (Backspace) key to make corrections.
•
Press
OK
•
Press
abc/@#$ to switch between letters and symbols.
A pop-up window displays the message:
Settings Changed!
Remember new settings?
Select Yes to save the settings.
Select No to cancel.
