Honeywell TB7300A5014B Скачать руководство пользователя страница 11

Страница: 11 / 24

TB7300 SERIES COMMUNICATING FAN COIL THERMOSTATS

62-2018—05

STATUS LED’S

The three LEDs on the thermostat cover are used to indicate the status of the fan (any speed), a call for heat, or a call

for cooling.

• When any of the fan speeds are ON, the FAN LED will illuminate.

• When heating and reheat is ON, the HEAT LED will illuminate.

• When cooling is ON, the COOL LED will illuminate.

Fig. 10. Fan coil thermostat buttons and display

User Control Options

Unoccupied mode Override

An Override can be made on commercial models during an Unoccupied period. If the Override option is enabled in the

Lockout

parameter, pressing the middle override button will resume occupied setpoints for a time specified by

parameter

TOccTime

Table 4. Keypad interface

Any setpoint change can be permanent or temporary based on parameter

Set Type

(setpoint type).

Any setpoint written through the network, will be permanent and cancel any active temporary setpoints.

Lockouts of access to certain functions is made with parameter (

Lockout)

Service

Indicates that there is a service alarm as per one of the programmable binary input (BI2)

Filter

Indicates that the filters are dirty as per one of the programmable binary input (BI2)

Window

Indicates that the outside window or door is opened and that the thermostat has cancelled any cooling or
heating action (BI1)

System

Is used to toggle between the different system modes available as per sequence and menu selected.

Pressing repetitively the button will toggle between all the available modes.

Available menus are dependent on selected sequence of operation.

Fan

Is used to toggle between the different fan modes available per sequence and menu selected.

Pressing repetitively the button will toggle between all the available modes.

Available menus are dependent on selected sequence of operation and menu selected for Fan.

°C/°F

Override

Middle key is

•

°C/°F for Hotel models.

•

Override for commercial models.

Down

Adjust the setpoints down

•

In cooling mode only the cooling setpoint is displayed.

•

In heating mode only the heating setpoint is displayed.

•

In auto mode (see below).

Adjust the setpoints up

•

In cooling mode only the cooling setpoint is displayed.

•

In heating mode only the heating setpoint is displayed.

•

In auto mode (see below).

MODE

FAN

M16982

°C

°F

Hotel models °C/°F

MODE

FAN

M16983

OVERRIDE

Commercial models with Override

Содержание TB7300A5014B

























Результаты поиска

Содержание TB7300A5014B

Отзывы:

Похожие инструкции для TB7300A5014B

Бренды по названию

Популярные бренды

Honeywell TB7300A5014B, Руководство по установке

Результаты поиска

Содержание TB7300A5014B

Отзывы:

Похожие инструкции для TB7300A5014B

Бренды по названию

Популярные бренды