Honeywell PC42d, Инструкция пользователя

Страница: 13 / 65

Chapter 1: About the Printer
User Instructions for PC42d Desktop Printer 5
LED Status Light (continued)
LED Status Description
Flickering green light The printer has just been activated.
Printing is suspended. Press the printer button
again to resume printing or press it for 3 seconds
to cancel the printing job.
Rapidly-flickering green light The printer is communicating.
Simulator (ZSim and ESim) is being activated.
Stable constantly-lit orange light The printer head has over-heated. Wait unit it
has cooled down to acceptable temperature
before resuming printing.
Flickering orange light The printer is using the USB thumb drive to
upgrade its firmware.
Remove the USB thumb drive after the LED light
shows stable constantly-lit green light.
Flickering red light
The printer is in ‘Error’ mode. It could be
because: The medium has run out; the printer
head is lifted; printing channel is cluttered with
labels, or paper-feeding test has not be carried
out (press the printer button to print a few test
labels).
Once the error is corrected, press the printer
button again to restart printing.
Inter-changing flickering red and
green lights
There is a problem with the printer’s hardware.
Send the printer to Honeywell for repair. Please
see Page VII
“Product Services and Repair”
for
more information.
Medium
The printer is capable of printing labels, tags and continuous (receipts and
linered-paper) medium. It also supports direct thermo-sensitive medium. The printing
width supported by PC42d printer is 1-4.33 inches (25-110mm).