manualshive.com logo in svg

Honeywell NOTIFIER LDM Series, Инструкция по эксплуатации, Страница: 46 / 68

Поделиться
Скачать
Honeywell NOTIFIER LDM Series Скачать руководство пользователя страница 46

46

LDM Series Instruction Manual —

 P/N 15885:H3 8/12/2019

NFS2-3030 and NCA-2 (UL 9th), AM2020/AFP1010, NFS-3030, or NCA (UL 8th)

Annunciator Programming

C.7  Annunciator Programming 

LDM points must be programmed from the FACP before the LDM will function. The NFS2-3030, NFS-3030, NCA-2, NCA and 
AM2020/AFP1010 employ the following format for annunciator points: 

For programming the Lamp Driver Series into the FACP or network annunciator’s memory, and for mapping system points and software 
zones to annunciator points, refer to the appropriate FACP/network annunciator documents referenced in Section 1.3, “Related Docu-
mentation”, on page 7. In the NFS2-3030, NFS-3030, NCA-2, and NCA documentation, refer to the sections about ACS Programming 
and ACS Point Programming. In AM2020/AFP1010 documentation, refer to the sections about Programming for Remote Annunciation.

C.8  Operation

LDM points 'track' or follow those system points they are programmed to annunciate; the points do not latch unless latched by the panel. 
Table C.1 is a list of how the LDM-32 annunciates various AM2020/AFP1010 devices and functions; all functions are the same for NFS-
3030/NFS2-3030/NCA/NCA-2. Note: Control Switches marked 'not used' will still function as local LAMP TEST switches for their 
respective LEDs.

For more information on LDM operation and FACP programming under various specific applications, refer to the appropriate FACP/net-
work annunciator documents referenced in Section 1.3, “Related Documentation”, on page 7.

A(xx) P(yy)

LDM (Annunciator) address

 is the range of 1-32, as set on the 

annunciator’s rotary decimal switches.

LDM (Annunciator) point

LDM Alarm/Trouble Mode:

LDM Alarm Only Mode:

LDM-32
points 1-16

LDM-32
points 1-32

1st LDM-E32
points 17-32

1st LDM-E32
points 33-64

2nd LDM-E32
points 38-48

3rd LDM-E32
points 49-64

Point Type

Alarm and Trouble Mode

Alarm Mode Only

Red LED

Yellow LED

Control Switch

Control Module

XPC Circuit
XPR Circuit

Indicates on/off status 

of module or circuit

Indicates trouble/

supervisory status of 

module or circuit

Turn module on/off

Monitor Module

XPM Circuit

Indicates active status 

of module or circuit

Indicates trouble/

supervisory status of 

module or circuit

not used

Intelligent Detector

Indicates fire alarm 

status of detector

Indicates trouble 

status of detector

not used

Software Zone

Indicates active status 

of software zone

Indicates trouble/

supervisory status of 

software zone

not used

ACK/STEP key

Indicates Fire Alarm

Indicates System 

Trouble

Functions as an 

ACK/STEP key

SIGNAL SILENCE 

key

not used

Indicates Signals 

Silenced

Functions as a SIGNAL 

SILENCE key

SYSTEM RESET 

key

Indicates Fire Alarm

Indicates System 

Trouble

Functions as a 

SYSTEM RESET key

LAMP TEST key

not used

not used

Functions as a LAMP 

TEST key

Table C.1  Lamp Driver Point Functions

Содержание NOTIFIER LDM Series





































































Отзывы:

Нет отзывов