LDM Series Instruction Manual —
P/N 15885:H3 8/12/2019
35
AIM-200 Point Annunciation
System 5000 (UL 8th)
•
Annunciator Address 2:
– Intelligent Detectors, addressed 1-64, on the AIM-200 installed next to the CPU-5000.
•
Annunciator Address 3:
– Addressable Modules, addressed 1-64, on the AIM-200 installed next to the CPU-5000.
•
Annunciator Address 4:
– Intelligent Detectors, addressed 65-96, followed by Addressable Modules, addressed 65-96, on the AIM-200 installed next to the
CPU-5000.
The System 5000 Programming Manual, Document 15584, provides programming instructions for this option. Refer to program choice
'AIM(256).
Alarm and Trouble Mode without 8-Point Shift
Notes:
1) Circuit corresponds to a specific I/O module installed in user configured System 5000.
2) Without 8-Point Shift, the first 8 optional control switches correspond to CPU switch functions: ACK, RES,
NAC 1, NAC 2, MUN TIE, RELAY.
8 CPU
points
8 unusable
AIM-200
points
48 points mapped to the
next six modules installed.
NOTE:
AIM-200 detector and module addresses 97, 98 and 99 may be used, but cannot be point-annunciated.
LDM Switch
Position
LDM-32
1st LDM-E32 2nd LDM-E32 3rd LDM-E32
1
ACK
Circuit 9
Circuit 25
Circuit 41
2
SIG.SIL.
Circuit 10
Circuit 26
Circuit 42
3
RESET
Circuit 11
Circuit 27
Circuit 43
4
not used
Circuit 12
Circuit 28
Circuit 44
5
NAC 1
Circuit 13
Circuit 29
Circuit 45
6
NAC 2
Circuit 14
Circuit 30
Circuit 46
7
MUN TIE
Circuit 15
Circuit 31
Circuit 47
8
Alarm Relay
Circuit 16
Circuit 32
Circuit 48
9
Circuit 1
Circuit 17
Circuit 33
Circuit 49
10
Circuit 2
Circuit 18
Circuit 34
Circuit 50
11
Circuit 3
Circuit 19
Circuit 35
Circuit 51
12
Circuit 4
Circuit 20
Circuit 36
Circuit 52
13
Circuit 5
Circuit 21
Circuit 37
Circuit 53
14
Circuit 6
Circuit 22
Circuit 38
Circuit 54
15
Circuit 7
Circuit 23
Circuit 39
Circuit 55
16
Circuit 8
Circuit 24
Circuit 40
Circuit 56
Table B.3 LDM Switch Control Functions