Honeywell NOTIFIER ACS Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 60

background image

8

ACS Manual —

P/N 15842:

N3

5/4/2022

Section 1: Introduction

1.1 About This Manual

The core of this manual provides instructions for connecting an ACS series annunciator to various fire alarm control panels (FACPs). Each
appendix contains instructions that are unique to a particular control panel. Section 1.3 “Related Documentation” lists part numbers for man-
uals of compatible equipment such as control panels.

This manual provides instructions for two sets of ACS series annunciators. Both sets can be used in the same fire alarm system. There are
four basic controller modules, each with its own expander module:

•

ACM-24AT, ACM-48A, AEM-24AT, and AEM-48A: Up to 96 points can occupy the same address, subject to the limits of the control
panel.

•

ACM-16AT, ACM-32A, AEM-16AT, AEM-32A, and multi-color variations (Section 3, “Product Overview” lists similarly numbered
models that provide different LED colors): Up to 64 points can occupy the same address, subject to the limits of the control panel.

In this manual, when the two varieties of ACS annunciator differ, the ACM-24AT/ACM-48A annunciators are discussed first.

1.2 UL 864 Compliance

1.2.1 Products Subject to AHJ Approval

ACM-24AT, ACM-48A, ACM-16AT, ACM-32A, and their expanders have been certified to comply with the requirements in the Standard
for Control Units and Accessories for Fire Alarm Systems, UL 864 9th Edition.

The following products have not received UL 864 9th Edition certification and may only be used in retrofit applications.

Operation of ACM-

24AT, ACM-48A, and their expanders with products not tested for UL 864 9th Edition has not been evaluated and may not comply with
NFPA 72 and/or the latest edition of UL 864. These applications will require the approval of the local Authority Having Jurisdiction (AHJ).

1.3 Related Documentation

Table 1.1 provides a list of document sources (manuals) containing additional information regarding the fire alarm control panels and com-
ponents that ACS annunciators can be connected to. The NOTIFIER document (DOC-NOT) chart provides the current document revision.

• AFP-100

• AM2020/AFP1010 Systems

• System 500

• AFP-200

• CPU-640

• System 5000

• AFP-300/AFP-400

• CPU-3030

• AIM-200

• NCA

• INA

Document Name

P/N

Device Compatibility Document

15378

NFS-320 Listing Document
NFS-320C Canadian Addendum

52745LD
52745CDN

NFS2-640 Listing Document

52741LD

NFS-640 Installation Manual (UL 8th)

51332

NFS2-3030 Listing Document

LS10006-051NF-E

NFS-3030 Installation Manual (UL 8th)

51330

System 5000 Installation Manual (UL 8th)
AIM-200 Manual (UL 8th)

15583
15949

System 500 Installation Manual (UL 8th)

15019

AFP-100 Installation Manual (UL 8th)

51010

AFP-200 Installation Manual (UL 8th)

15511

AFP-300/AFP-400 Installation Manual (UL 8th)

50253

AM2020/AFP1010 Installation Manual (UL 8th)

15088

VeriFire® Tools help file

downloadable

NCA Network Control Annunciator Manual (UL 8th)

51482

NCA-2/C Network Control Annunciator Manual

52482

Table 1.1 Related Documentation

«
...
6
7
8
9
10
...
»

Содержание NOTIFIER ACS Series





























































Отзывы:

Нет отзывов

Похожие инструкции для NOTIFIER ACS Series

615 Series ANSI

Бренд: ABB Страницы: 60

Бренд: FAAC Страницы: 12

Бренд: Bang & Olufsen Страницы: 36

Бренд: Mad Catz Страницы: 4

Бренд: Datalogic Страницы: 15

Бренд: Samson Страницы: 6

Бренд: Eaton Страницы: 96

Бренд: Polycom Страницы: 2

Cutler-Hammer LMR

Бренд: Eaton Страницы: 38

Бренд: Bentel Security Страницы: 4

Бренд: Whale Страницы: 8

Бренд: Tascam Страницы: 8

Бренд: GEM Страницы: 17

Бренд: Automated Logic Страницы: 10

SmartScene IR Remote Series

Бренд: Thorlux Lighting Страницы: 2

Бренд: Yudian Страницы: 10

Бренд: Barco Страницы: 4

Бренд: Castex Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды