9
1.
2.
3.
4.
5.
1.
In
set access point address ( ).
Door number
1
From
dropdown list select
object that corresponds to the territory located on the side of reader’s
Exit:
Region
entrance ( ).
2
From
dropdown list select
object that corresponds to the territory located on the side of reader’s
Enter:
Region
exit ( ).
3
Click
in order to save changes ( ).
Apply
4
Setting up access point parameters is completed.
Setting up HoneyWell N-1000 access point readers
Setting up access point readers is carried out on setting panel of
object. This object is created on the basis
N1000 reader
of
object on
tab of
dialog box.
N1000 door
Hardware
System settings
Setting up access point readers is carried out the following way:
Go to setting panel of
object.
N1000 reader