10
1.
2.
3.
4.
5.
6.
7.
8.
9.
Set reader address in the corresponding field ( ).
1
Select reader type from
dropdown list: reader only, reader with keyboard, keyboard only ( ).
Type
2
If keyboard is used set its address in the corresponding field ( ).
7
From
dropdown list select reader operation mode: entrance or exit ( ).
Direction
3
In
setting group deselect
checkbox and select object corresponding to relay or relay group
Activization
Default
(both entrance and exit) for activation after passing through this reader ( ).
4
In
field set a number that corresponds to the number of failed access attempts after which
Cheating threshold
there is activation of specified device ( ).
5
From
and
dropdown lists select object corresponding to relay or relay group (both entrance and exit)
Type
Name
for activation after attempt to select access card ( ).
6
Click
in order to save changes ( ).
Apply
8
Setting up access point reader is completed.
Setting up HoneyWell N-1000 relays
Setting up HoneyWell exits
Creation and setting up of exits
Setting up exits is carried out on setting panel of
object. This object is created on the basis of
N1000 exit
N1000 panel
object on
tab of
dialog box.
Hardware
System settings
Note.
If
checkbox is set then there is activation of device that is set on default in equipment settings.
Default