14
1.
2.
3.
4.
a.
b.
5.
6.
1.
Go to setting panel of
object.
N1000 zone
Set address of entrance group in the corresponding field ( ).
1
Set checkboxes opposite those entrances that should be in the group ( ).
2
In
setting group set parameters of disconnection entrance group:
Bypass
In
field set period during which entrances of the group will be disconnected ( );
Duration
3
From corresponding dropdown list select time zone during which entrances of the group disconnect
automatically ( ).
4
If it’s necessary set time zone during which there will be no interactions connected with this group of entrances ( ).
5
Click
in order to save changes ( ).
Apply
6
Setting up of entrances groups is completed.
Setting up HoneyWell N-1000 relay interlock
Setting up relay or relay groups interlocks is carried out on setting panel of
object. This object is
N1000 interaction
created on the basis of
object on
tab of
dialog box.
N1000 panel
Hardware
System settings
Setting up relay or relay groups interlocks is carried out the following way:
Go to setting panel of
object.
N1000 interaction