15
1.
2.
3.
4.
5.
6.
1.
In
parameter group from
and
dropdown lists select action object that corresponds to
Initiator object
Type
Name
relay or relay group. Activating and deactivating this object you activate specified action of action object ( ).
1
In
parameter group from
and
dropdown lists select action object that corresponds
Dependent object
Type
Name
to relay or relay group. Activating and deactivating this object you activate specified action of initiator object ( ).
2
From the corresponding dropdown list select action that should be done when initiator activated ( ).
3
From the corresponding dropdown list select action that should be done when initiator deactivated ( ).
4
Click
in order to save changes ( ).
Apply
5
Setting up interlock is completed.
Sending commands to HoneyWell N-1000 controller
Sending commands to controller is carried out from setting panel of
object. This object is created on the
N1000 command
basis of
object on
tab of
dialog box.
N1000 panel
Hardware
System settings
Sending commands to controller is carried out the following way:
Go to setting panel of
object.
N1000 command