17
5.
1.
2.
3.
1.
2.
3.
4.
Click
in order to save changes ( ).
Apply
5
Registration of maximal configuration is completed.
Registration of selected controller configuration
Registration of selected controller configuration is carried out on setting panel of
object corresponding to
N1000 panel
required controller. It is carried out the following way:
To register controller configuration click
( ).
Forward configuration 1
To register access cards of users click
( ).
Forward users 3
To synchronize time click
( ).
Set time 4
Registration of controller configuration is completed.
Working with HoneyWell N-1000 integration
module
General information about working with HoneyWell
N-1000 module
The following interface objects are used for working with
integration module:
HoneyWell N-1000
Card;
Event protocol;
Visitor Management System;
Time and Attendance.
Information about these interface objects’ configuration is given
Intellect Software package: Administrator's Guide
,
Visitor
and
.
Management System Module Settings and Operation Guide
Time and Attendance Module Settings and Operation Guide
Working with interface objects is given in details in
.
Intellect Software package: Operator's Guide
Controlling HoneyWell N-1000 access point
Controlling access point of
is carried out in
interactive box using feature menu of
HoneyWell N-1000 ACS
Card
N1000
object.
door
Description of feature menu commands of
object is given in the table.
N1000 door
Command of feature menu
Functionality
Open the door for time
Open passage through access point for some time
Close the door
Close passage through access point
Open the door
Open passage through access point
Controlling HoneyWell N-1000 entrances or entrance
group
Controlling entrances or entrance group of
is carried out in
interactive box using feature
HoneyWell N-1000 ACS
Card
menu of
or
objects.
N1000 entrance
N1000 zone
Note.
To restart controller click
( )
Restart 2
.