6
1.
2.
a.
b.
3.
4.
5.
a.
b.
6.
Setting up controller of
is carried out the following way:
HoneyWell N-1000 ACS
Go to setting panel of
object.
N1000 panel
Set connection parameters of controller:
Set controller address in
( ).
Panel address 1
From
dropdown list select type of connected controller ( ).
Panel type
2
In
set codes used by organization (facility codes) ( ).
Facility codes
3
Select format of linking access card number and organization code (facility code) from the corresponding dropdown
list ( ).
4
Set up user access through PIN code:
Set
checkbox if it’s necessary to ask PIN code of the user while giving the access ( ).
Allow
5
From the corresponding dropdown list select time zone during which it’s necessary to ask PIN code of the
user while giving the access ( ).
6
Set up basic controller options:
Note.
If there is no need to link access card number and organization code it’s necessary to set
value.
None