manualshive.com logo in svg

Honeywell MX7 Tecton, Справочное руководство

"Пользовательский мануал Honeywell MX7 Tecton доступен для скачивания бесплатно на нашем веб-сайте. Этот Reference Manual поможет вам использовать продукт с максимальной эффективностью. Посетите {веб-сайт} сейчас, чтобы загрузить свой экземпляр и получить подробные инструкции по эксплуатации."

Поделиться
Скачать
background image

Message

Explanation and/or corrective action

Level

Switching to admin-
kbdhook.dll not found

The keyboard hook load failed, so AppLock switches to admin mode. If a password is specified, the password
prompt is displayed and remains until a valid password is entered.

LOG_PROC-
ESSING

Switching to admin-key-
board hook initialization fail-
ure

If the keyboard hook initialization fails, AppLock switches to admin mode. If a password is specified, the pass-
word prompt is displayed and remains until a valid password is entered.

LOG_PROC-
ESSING

Switching to admin-reg-
istry read failure

See the explanation of the “Registry read failure” above. AppLock is switching into Admin mode. If a password
has been configured, the prompt will be displayed and will not be dismissed until a valid password is entered.

LOG_PROC-
ESSING

Switching to Task-
barScreenMode

In administration mode, the taskbar is visible and enabled.

LOG_EX

Switching to user mode

The registry was successfully read and AppLock is starting the process to switch to user mode.

LOG_PROC-
ESSING

Switching to user-hotkey
press

The system is currently in admin mode and is now switching to user mode. The switch occurred because of a
hotkey press by the administrator.

LOG_PROC-
ESSING

Taskbar hook failure

AppLock is unable to control the taskbar to prevent the locked application from re-enabling it.

LOG_ERROR

Taskbar hook OK

AppLock successfully installed control of the taskbar.

LOG_EX

Timeout looking for app
window

After the application is launched, AppLock must wait until the application has initialized itself before proceeding.
The application did not start successfully and AppLock has timed out.

LOG_ERROR

ToUser after admin, not at
boot

The user mode switch is attempted when the device boots and after the administrator presses the hotkey. The
mode switch is being attempted after a hotkey press.

LOG_EX

ToUser after admin-app
still open

The switch to user mode is being made via a hotkey press and the administrator has left the application open
and has not made any changes in the configuration.

LOG_EX

ToUser after admin-no
app or cmd line change

If user mode is being entered via a hotkey press, the administrator may have left the configured application
open. If so, AppLock does not launch the application again unless a new application or command line has been
specified; otherwise, it just locks it.

LOG_EX

Unable to move desktop

The desktop is moved when switching into user mode. This prevents them from being visible if the application is
exited and restarted by the timer. This error does not affect the screen mode switch; processing continues.

LOG_ERROR

Unable to move taskbar

The taskbar is moved when switching into user mode. This prevents them from being visible if the application is
exited and restarted by the timer. This error does not affect the screen mode switch; processing continues.

LOG_ERROR

Unhook taskbar wndproc
failure

AppLock could not remove its control of the taskbar. This error does not affect AppLock processing

LOG_ERROR

Unhook wndproc failure

AppLock could not remove the hook that allows monitoring of the application.

LOG_ERROR

Unhooking taskbar

In administration mode, the taskbar should return to normal operation, so AppLock’s control of the taskbar
should be removed.

LOG_EX

Unhooking wndproc

When the administrator leaves user mode, the device is fully operational; therefore, AppLock must stop mon-
itoring the locked application.

LOG_EX

WM_SIZE adjusted

This message denotes that AppLock has readjusted the window size.

LOG_EX

X after Ctrl+L

Processing the backdoor entry.

LOG_EX

Ret from password <#>

Return value from password dialog.

LOG_EX

Decrypt data len <#>

Length of decrypted password.

LOG_EX

Window handle to enum-
windows=%x

The window handle that is passed to the enumeration function. This message can be used by engineering with
other development tools to trouble shoot application lock failures.

LOG_EX

WM_WINDOWPOSCHG
adjusted=%x

Output the window size after it has been adjusted by AppLock

LOG_EX

4-55

Содержание MX7 Tecton















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX7 Tecton

SanDisk Photo Album Brochure preview
Photo Album
Бренд: SanDisk Страницы: 2
ZKTeco inBIO260 Installation And Connection Manual preview
inBIO260
Бренд: ZKTeco Страницы: 3
Hamlet HBCS2D300U User Manual preview
HBCS2D300U
Бренд: Hamlet Страницы: 63
HIKVISION DS-K1107MK User Manual preview
DS-K1107MK
Бренд: HIKVISION Страницы: 6
Prestigio PER5162 User Manual preview
PER5162
Бренд: Prestigio Страницы: 25
Ask RDR 417 User Manual preview
RDR 417
Бренд: Ask Страницы: 13
Franklin Crossword Puzzle Dictionary CWP-570 User Manual preview
Crossword Puzzle Dictionary CWP-570
Бренд: Franklin Страницы: 7
IEI Technology MODAT-100 User Manual preview
MODAT-100
Бренд: IEI Technology Страницы: 41
Unitech MS351 User Manual preview
MS351
Бренд: Unitech Страницы: 99
Cansec CanProx One Installation Instructions Manual preview
CanProx One
Бренд: Cansec Страницы: 6
Monitor MB206 Reference Manual preview
MB206
Бренд: Monitor Страницы: 98
Sensory Solutions PBR User Manual preview
PBR
Бренд: Sensory Solutions Страницы: 24
TSC TTP-286MT Series Service Manual preview
TTP-286MT Series
Бренд: TSC Страницы: 39
tecan INFINITE M1000 PRO Instructions For Use Manual preview
INFINITE M1000 PRO
Бренд: tecan Страницы: 137
Kantech P345KPMTR Installation Manual preview
P345KPMTR
Бренд: Kantech Страницы: 16
E-Seek M280 Reference Manual preview
M280
Бренд: E-Seek Страницы: 10
Marschall AS-7310 Quick Manual preview
AS-7310
Бренд: Marschall Страницы: 2
RIOTEC iLS6302J/KBU Quick Manual preview
iLS6302J/KBU
Бренд: RIOTEC Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды