Honeywell ML6984 Скачать руководство пользователя страница 1

Страница: 1 / 12

PRODUCT DATA

95C-10939-11

ML6984, ML7984 Series 4000
Direct Coupled Valve Actuators

FEATURES

• Self-contained, motorized globe valve linkage.

• Microprocessor-based digital position sensing and

motor control for accurate positioning.

• Compact size for easy installation in confined spaces.

• NEMA 3R rain-proof cover for outdoor installation.

• Self-calibrating for valve stroke from 1/2 in. (13 mm)

to 1 in. (25 mm).

• DIP switch input configuration selection.

• LED (light-emitting diode) status indication.

• Configurable to 3-wire mode for floating models.

• 710 N 160 lbf (712 N) valve closing force.

• Usable with common transformer power supply for

multiple actuators and controllers.

• 24 Vac or 28 Vdc power supply.

• Field-addable position feedback/auxiliary switch

module available for 5-wire models.

APPLICATION

The ML6984 and ML7984 are self-contained, self-
adjusting, motorized valve actuators that mount directly
onto V5011 two-way and V5013 three-way globe valves,
providing linear stem operation between 1/2 in. (13 mm)
and 1 in. (25 mm).

ML6984 is for use with low voltage SPDT Series 20, Series
60 (on-off), or SP3T Series 60 (floating) electro-
mechanical and electronic controllers.

ML7984 is for use with Series 70 0-10 Vdc, 2-10 Vdc, 4-20
mA; electronic Series 90 “SuperMod”; and 135 ohm
modulating controllers.

Contents

Specifications ...............................................................................

Ordering Information ................................................................

Installation ....................................................................................

Wiring Schematics .....................................................................

Operation .......................................................................................

Replacement Notes .................................................................... 10
Checkout ........................................................................................ 11
Troubleshooting .......................................................................... 12

Содержание ML6984













Результаты поиска

Содержание ML6984

Отзывы:

Похожие инструкции для ML6984

Бренды по названию

Популярные бренды

Honeywell ML6984, Руководство пользователя

Результаты поиска

Содержание ML6984

Отзывы:

Похожие инструкции для ML6984

Бренды по названию

Популярные бренды