Rev. 1.0
19
900.0688
9-Dec-05
8.5
ADDING PTZ CONTROL
In the default configuration, camera number 1 is the
only
camera configured as a PTZ
camera (PTZ control). The default PTZ address is set to 1. If there are other PTZ
cameras connected to the switcher, the video input table must be edited to define these
cameras. If camera number 1 is not a PTZ, control should be removed from this input.
1. With SETMAX running and A:/Title.max opened, select the
Video Inputs
tab.
a. Select the first camera to edit using either the mouse or the arrow keys.
b.
Select
the
SOURCE CONTROL
cell. Select the button that appears
(
) and four additional columns appear.
