Honeywell KMD 250, Руководство пилота

Страница: 173 / 274

2-54
Section 2
FIS Operation
Rev 4 Aug/2007
KMD 250 Pilot's Guide
USING THE FIS TEXT
PAGE
Press the WX Function Select
Key until the FIS Textual Page
is displayed as shown in Figure
2-53.
NOTE: If a notification such as
that shown in Figure 2-54 is
displayed, it may be that the
system has not had time to
acquire a signal. If this notifi-
cation is still present after a few
minutes, refer to the FIS NOTI-
FICATIONS section of this sec-
tion.
If no METAR is available in the
selected area, a notification
such as that shown in Figure 2-
55 will be displayed.
The example displayed in
Figure 2-53 is a METAR report
for
KIXD , which was selected
as a User Defined area .
Press the METAR MAP
Softkey to display the graphical
METAR for the
KIXD as shown
in Figure 2-56. Press the
MORE INFO Softkey to return
the textual report.
The METAR MAP Softkey will
change depending on the
selected weather product. In
this case a METAR is being
viewed so the label displays
METAR MAP . If viewing an
AIRMET, the label would show
AIRMET MAP and so on. In
short, pressing this softkey will
display the graphical weather
product for the appropriate tex-
tual weather product selected.
NOTE: See Appendix B for a
list of common weather abbre-
viations.
Normal Operation
Figure 2-53
Figure 2-54
Figure 2-55
Figure 2-56
KMD 250 FIS_R4 8/13/07 10:07 AM Page 2-54