- 21 -
— Enter maximum value after pressing MAX VALUE setup key (7). Input of MAX
VALUE is allowed only within SET RANGE on the right-hand side.
(Set range : -100 ~ 300
°
C)
— Enter delay time after pressing DELAY time setup key (8). Input of DELAY time
is allowed only within SET RANGE on the right-hand side. (0 ~ 99 SEC)
4. Setting up TEMP/DV/ABS/ON, MIN VALUE, MAX VALUE, and DELAY(SEC)
— Press TEMP at object selection key (2). The TEMP key is reversed.
— Press DV at object value selection key (3). The DV key is reversed.
— If you choose DV, the ABS key is automatically selected.
— Press ON at output operation selection key (5). The ON key is reversed.
— Enter minimum value by pressing MIN VALUE setup key (6). Input of MIN VALUE
is allowed only within SET RANGE on the right-hand side.
(Set range : -100 ~ 300
°
C)
— Enter maximum value by pressing MAX VALUE setup key (7). Input of MAX VALUE
is allowed only within SET RANGE on the right-hand side.
(Set range : -100 ~ 300
°
C)
— Enter delay time by pressing DELAY time setup key (8). Input of DELAY time is
allowed only within SET RANGE on the right-hand side. (0 ~ 99 SEC)
Invalid Setup
At the time of setting up MIN VALUE and MAX VALUE of SP and DV,
MIN VALUE > MAX VALUE is invalid and cannot be entered.
Please enter MIN VALUE after entering MAX VALUE.
