Honeywell #HZ-7000 - Sure-set Digital Heater Fan страница 8 Скачать руководство пользователя | Manualshive

Страница: 8 / 74

background image

8

4.

HEAT - Situate away from items that produce heat or are heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers).

5.

WATER AND MOISTURE - Do not use this unit near water or in an unprotected outdoor installation, or any area
classified as a wet location.

6.

ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may result in
the risk of fire, electric shock, or injury to persons.

7.

ACCESSORIES - Only use accessories specified by the manufacturer.

8.

CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

9.

SERVICING - Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

10. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.

Warranty and Service

Subject to the terms and conditions listed on the Product Warranty Card, during the warranty period Honeywell will
repair or replace, at its sole option, free of charge, any defective products returned prepaid.

In the event you have a problem with any Honeywell product, call Customer Service for assistance or to request a
Return Merchandise Authorization (RMA) number. Be sure to have the model number, serial number, and the nature
of the problem available for the technical service representative.

In the U.S.A. and Canada, call 1.800.796.2288. See the back cover for other contact details.

Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to Honeywell without a
clearly identified Return Merchandise Authorization (RMA) number may be refused.

WEEE (Waste Electrical and Electronic Equipment). Correct disposal of
this product (applicable in the European Union and other European
countries with separate collection systems). This product should be
disposed of, at the end of its useful life, as per applicable local laws,
regulations, and procedures

«
...
6
7
8
9
10
...
»

Содержание #HZ-7000 - Sure-set Digital Heater Fan











































































Отзывы:

Нет отзывов

Похожие инструкции для #HZ-7000 - Sure-set Digital Heater Fan

Бренд: Patron Страницы: 8

Бренд: Laars Страницы: 68

Бренд: L.B. White Страницы: 99

Бренд: Sentiotec Страницы: 28

Бренд: Wahl Bach Страницы: 12

Бренд: jbc Страницы: 16

Бренд: InSinkErator Страницы: 16

Бренд: NARVI Страницы: 40

LX ACDC/M+K 100 A

Бренд: Logitex Страницы: 18

Бренд: Haverland Страницы: 16

Бренд: Reznor Страницы: 32

CombairSteamer V2000 Series

Бренд: V-ZUG Страницы: 68

Бренд: Nippa Страницы: 12

LDHR062-150KB-S

Бренд: Warmfloor24 Страницы: 29

Бренд: Zelmer Страницы: 54

Бренд: Orava Страницы: 18

SL2 20 LUX WI-FI 2.5 FE

Бренд: Ariston Thermo Страницы: 36

Бренд: Ariston Thermo Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды