Honeywell #HZ-7000 - Sure-set Digital Heater Fan, Инструкция по установке и эксплуатации

Страница: 60 / 74

60
System Administration and Troubleshooting
Setting Properties
To set hardkey properties:
1. Press Set Properties.
A message pops up and requires
you to press a hardkey.
2. Press a hardkey.
3. Press Max Key to start operating
or press Cancel to quit.
The scroll menu shows all types of
executive actions you can do. You
can use any of the methods below
to search the executive actions.
• Touch the up/down arrow of
the menu to scroll the items
and press the item directly to
complete selection.
• Press Prev/Next to scroll the
item one by one.
• Press PG UP/PG DOWN to
scroll the items page by
page. Then touch the item
directly.
• Press GotoKey and enter the
ID of the action. The item will
display on the menu
immediately.
4. When the executive action is
displays, press Select Action to confirm. Then you can continue adding actions to
the hardkey following step 3,4 or skip to step 5 to finish.
• Press Prev Step/Next Step to review the previous/next action relative to the
current action.
• Press Ins Actio to select another action put behind the current action.
• Press Del Actio to delete the current step of action.
5. Press Edit Name to give a new name to the hardkey, then press Enter to save and
quit.
Adding a New Key
To add a new key.
1. Press New Key to enter the key number and key action name, then press Enter to
save and quit.
• Enter the key number. Just type the number and press Enter to save.
• Enter a new name for the key action. You can press Down/Up to select the
characters. Press Enter to save.
To delete a key, press Del Key.
2. Press OK to save and exit.