Honeywell HI-SPEC, Руководство по установке

Страница: 9 / 12

HI-SPEC unit_HON.doc 07/2011 9 of 12
Connections
X1
1+2 Fault resistance for fault contact II (just to connect, if the contact as normally open programmed is, no standard)
X1
3+4 alarm resistance for alarm contact “alert alarm II” (just to connect, if the contact as normally open programmed is, standard)
X1
5+6 alarm resistance for alarm contact “action alarm II” (just to connect, if the contact as normally open programmed is, standard)
X1
7+8 alarm resistance for alarm contact “fire alarm II” (just to connect, if the contact as normally open programmed is, standard)
X2
1+2 Fault resistance for fault contact I (just to connect, if the contact as normally open programmed is, no standard)
X2
3+4 alarm resistance for alarm contact “alert alarm I” (just to connect, if the contact as normally open programmed is, standard)
X2
5+6 alarm resistance for alarm contact “action alarm I” (just to connect, if the contact as normally open programmed is, standard)
X2
7+8 alarm resistance for alarm contact “fire alarm I” (just to connect, if the contact as normally open programmed is, standard)
X3 / 1
X3 / 2
+ output line “Fault II“
- output line “Fault II”
X3 / 3
X3 / 4
+ output line “Alert alarm II“
- output line “Alert alarm II”
X3 / 5
X3 / 6
+ output line “Action alarm II“
- output line “Action alarm II”
X3 / 7
X3 / 8
+ output line “Fire alarm II“
- output line “Fire alarm II”
X4 / 1
X4 / 2
+ output line “Fault I“
- output line “Fault I”
X4 / 3
X4 / 4
+ output line “Alert alarm I“
- output line “Alert alarm I”
X4 / 5
X4 / 6
+ output line “Action alarm I“
- output line “Action alarm I”
X4 / 7
X4 / 8
+ output line “Fire alarm I“
- output line “Fire alarm I”
X5 / 1
X5 / 2
+ input line “Fault II“
- input line “Fault II”
X5 / 3
X5 / 4
+ input line “Alert alarm II“
- input line “Alert alarm II”