2.3 PENDANT DOME HOUSING, CONTINUED
g. Carefully slide the black nipple on the pendant housing into the mounting pipe.
If installing the dome on a threaded mount, thread the dome into the mount at
this time then connect the safety cable to a building support structure.
WARNING:
Do not force the dome into the mount; the threads on the
dome are plastic and could be damaged if force is used.
h. Line up the three mounting holes on the housing with the holes in the mount
piping. Use the three self-tapping hex head screws supplied with the mount to
secure the dome to the mount.
i. Slide the decorative cover flange on the mount (step 4 above) over the black
nipple on the housing.
6. Connect the field wiring to the housing mounting plate (removed in step 5 above).
Refer
to
Section 3
for wiring information.
Refer to
Section 3.2
for standard wiring.
Refer to
Section 3.3
for Unshielded Twisted Pair (UTP) wiring.
Rev. 1.02
9
900.0696
1-Aug-06
Содержание HD6 Series
