Configuring Storage Settings
63
If you want to erase all the data on the microSD card, click
Format
. A confirmation message
appears. Click
OK
to continue. The card is formatted and the camera reboots.
FTP
On the
FTP
tab, you can enable the FTP storage function. When enabled, event-triggered
video and snapshots (either scheduled or motion detection, depending on what you chose in
) will be saved to the specified FTP server.
Figure 8-5 FTP
Table 8-2 FTP Configurations
Parameter
Function
Enable
Select SFTP (Recommended) or FTP.
Server Address
Enter the IP address of the FTP server.
Port
The default setting is
21
. You can modify this setting as
necessary.
User Name
Enter the server user name.
Password
Enter the server password.
Remote Directory
Create a name for the directory where recorded video and
snapshots will be stored.
Panic Save
(Local)
Enable
Panic Save (Local)
to save to the local microSD card when
the network connection to FTP is unavailable.
Note
This function
is not supported by the following models:
HPW2P1/HBW2PER1.
NAS
On the
NAS
tab, you can enable network attached storage and configure storage settings.
