C7660 SELECTABLE TEMPERATURE SENSOR
63-2670EF—01
2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1.
Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2.
Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
Model:
C7660 Selectable Temperature Sensor
Case:
Duct mount
Temperature Sensing Element:
Thermistor
Output Signal:
4mA not OK to economize, 20 mA OK to
economize
Operating Ambient Temperature Range:
-40° to 149° F
(-40° to 65° C).
Shipping Temperature Range:
-40° to 149° F (-40° to
65° C).
Supply Voltage:
Power to sensor is supplied through
economizer or if not used with an economizer, logic power
input is 21.6 vdc ± 1.5 vdc.
Electrical Connections:
Two 1/4 in. (6.4 mm) quick connect
terminals.
Approval:
Underwriters Laboratories Inc. Flammability
Rating UL94-5V
Dimensions:
See Fig. 1
Hysteresis:
Hyst/- 1F; Economizer Cut-in 1F below
setpoint, Cut-out 1F above setpoint
Accuracy:
± 1° F
Fig. 1. C7660 Selectable Temperature Sensor Dimensions
in in. (mm).
INSTALLATION
When installing this Product...
1.
Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous
condition.
2.
Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3.
Installer must be a trained experienced service
technician.
4.
After installation is complete, check out product
operation as provided in these instructions.
5.
Verify dip switch settings match desired changeover
outside air temperature.
6.
Verify polarity of wiring connections from sensor to
controller is correct.
M27634
–
+
9/16
(14)
3-7/8 (96)
5/16 (8)
3-5/32
(80)
2-3/4
(70)
1 (25)
7/32
(6)
ON OFF
1 2 3