Honeywell C7660 Скачать руководство пользователя страница 1

PRODUCT DATA

63-2670EF-01

C7660 

Selectable Temperature Sensor

FOR ECONOMIZERS

GENERAL

C7660 Selectable Temperature Sensor is used with the 

W7459, W7215, W7212, W7213 and W7214 Economizer 

Controls. The economizer controls are mounted on an M7415/

M7215 Actuator. They permit the use of outdoor air as the first 

stage of cooling in heating, ventilating and air conditioning 

(HVAC) systems.

The C7660 Selectable Temperature Sensor is only to be used 

with single temperature change over with the sensor located 

in the outdoor air.

FEATURES

• Senses temperature of outdoor air and provides a 

signal to economizer control with OK or not OK to 

economize.

• Selectable dip switch provides 8 change over 

temperature options.

• When temperature of outdoor air is below change over 

temperature, the outdoor air damper is opened to 

reduce the cooling load in the building.

• Provides 4 OR 20 mA output signal to economizer 

control; At 4 mA not OK to economize, 20 mA OK to 

economize.

• Highly accurate microprocessor control.
• Sensor is enclosed in a rugged, corrosion-resistant 

plastic case.

• Replaces C7650 temperature sensors and the control 

function of temperature change over in the economizer 

control.

Contents

General ............................................................................. 1

Features ............................................................................ 1

Specifications .................................................................... 1

Ordering Information ......................................................... 2

Installation ......................................................................... 2

Operation .......................................................................... 3

Содержание C7660









Отзывы: