Honeywell AlarmNet GSMHS, Инструкция по установке и настройке

Страница: 5 / 56

1-1
S E C T I O N 1
General Information
                                                
System Overview
Introduction
Congratulations on your purchase of Honeywell's GSMHS High Security Digital Cellular
Communicator (henceforth referred to as GSMHS). It represents the latest and most
innovative communication technology for the security industry and uses the most
sophisticated encryption to ensure the highest level of security for your customer.
In addition to alarm reporting, the GSMHS provides upload/downloading capability of
Honeywell's control panel data over the Internet (via the AlarmNet-i network), using GSM
(Global System for Mobile) technology.
The GSMHS module requires an AlarmNet–i account. For new installations, please obtain the account
information from the central station prior to programming this module. For replacement installations,
the AlarmNet-i account is created automatically when the module is registered (based on the
existing account).
General Information
Honeywell's GSMHS Cellular Communicator transmits signals to the AlarmNet-i network
(GSM cellular network, which uses GPRS to complete these transmissions) and forwards
them to your central station.
System Features
Basic features of the GSMHS include:
 Quick connection to compatible Honeywell series control panels

Simple programming using a 7720P programming tool
 Reports fire, burg, and status messages via wireless network
 Allows uploading and downloading of control panel data via the wireless network
Modes of Operation
The GSMHS provides four modes of operation so it can be used with various types of control
panels, as summarized below.
UL
For UL installations, all signals must be transmitted via the GSMHS and the control panel
DACT. Closing ringback shall be provided via DACT.
ECP Mode
 This mode is for use with Honeywell controls that support LRR-ECP communication

The module connects to the control’s keypad terminals and provides 2-way communication
with the control using ECP messaging
 The control treats the module as a Long Range Radio (LRR) device, so program the control
accordingly, including setting the module’s proper LRR device address
 Reports are sent in Contact ID format

The module also supports two hardwire zone trigger inputs (zones 6 and 7)