Honeywell ADEMCO VISTA-48D, Инструкция по установке и настройке, Страница: 75 / 80

8-3
Compatible 5800 Series Transmitters Table
Model Product Input Type Description
5801 Wireless Panic
Transmitter UR or RF
•
Four pushbuttons, each with a unique input (loop) code.
•
Programmable responses (e.g., Panic, Arm, Disarm, etc.)
5802
Pendant
(Personal
Emergency Transmitter)
BR Only
•
Has single pushbutton.
•
Usually programmed for response type of 24-Hr audible or 24-Hr Silent
(other zone responses are possible).
5802CP
Belt Clip (Personal
Emergency) BR Only
Same as 5802.
5802MN
5802MN2
Miniature (Personal
Emergency Trans.) UR or RF
Same as 5802.
5804
Wireless Key
Transmitter BR Only
•
Has four pushbuttons, each with a unique input (loop) code.
•
Programmable responses (e.g., Arm, Disarm, etc.)
5804BD
Bi-Directional
Wireless Key BR Only
•
House ID must be set.
•
Requires 5800TM Transmitter Module or 5883 Transceiver.
•
Can indicate system status via its 2 LEDs and built-in sounder.
•
Has four pushbuttons, each with a unique input (loop) code.
•
Operates the system similarly to wired keypads.
5806
5807
5808LST
Wireless
Photoelectric Smoke
Detectors RF
One-piece smoke detectors with a built-in transmitter.
5809 Heat Detector RF
One-piece rate-of-rise heat detector with a built-in transmitter.
5816
5816MN
Door/Window
Transmitters RF
Has two unique input (loop) codes: one for a wired closed circuit contact
loop; the other for its built-in reed switch (used with a magnet).
5816TEMP Low-Temp. Sensor RF
Transmits a fault condition when temperature drops below 45°F.
5817 Multi-Point Universal
Transmitter
RF
Has three unique input (loop) codes: one for a “Primary” contact loop with
programmable options; the others for two “auxiliary” closed circuit contact
loops.
5818 Recessed Transmitter RF
•
Reed switch magnetic contact sensor; easily hidden in the frame and
edge of a door or window.
•
Has a single unique input (loop) code.
5819 Shock Processor
Transmitter
RF
•
Connects to externally mounted inertia-type shock detector (not supplied).
•
Has built-in tampered cover switch.
•
Has 3 unique input (loop) codes:
Loop 1: Terminals for a wired, N.C. sensor loop.
Loop 2: For a closed circuit contact loop using the built-in reed switch in
conjunction with a magnet.
Loop 3: Terminals for a wired, closed circuit contact loop.
5819WHS
5819BRS
Shock Processor
Transmitter RF
•
Has built-in shock sensor.
•
Has built-in tampered cover switch.
•
Has 3 unique input (loop) codes:
Loop 1: Built-in shock sensor loop wired to TB1 (normally closed).
Loop 2: For a closed circuit contact loop using the built-in reed switch in
conjunction with a magnet.
Loop 3: Externally wired, closed circuit loop connected to TB2.
5827
Wireless Keypad Uses House
ID only
•
Can be used to turn the burglary protection on and off.
•
Features the same built-in panic functions as wired keypads.
•
The keypad is identified as zone “00” on wired keypads when it transmits
with a low battery.
5827BD Wireless Two-Way
Keypad
Uses House
ID only
•
Requires 5800TM Transmitter Module.
•
Operates the system similarly to wired keypads, including panics.
•
Can indicate system status via its 3 LEDs and sounder.
•
Includes 3 panic keys.
5849
5852 Glassbreak Detector RF
•
House ID must also be set.
•
5849 requires both sound and shock of breaking glass to cause alarm to
be transmitted.
•
5852 uses intelligent acoustic processing.
5890
5890PI PR Detector RF or RM
Dual-element passive infrared detector/transmitter with built-in selectable
pulse count.
Note: There is a 3-minute lockout between fault transmissions to conserve
battery life.
5899 Magnets
Package of 4 magnets for use with 5816, 5817, and 5819WHS transmitters.