Honeywell ADEMCO VISTA-40 Скачать руководство пользователя | Manualshive

Страница: 9 / 96

background image

2-1

S E C T I O N 2

Partitioning

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Theory of Partitioning

This system provides the ability to arm and disarm up to 2 different areas, as if each had its own control. These areas
are called partitions. A Partitioned system allows the user to disarm certain areas while leaving other areas armed, or
to limit access to certain areas to specific individuals. Each system user can be assigned to operate any or all partitions,
and can be given a different authority level in each.

Before anything can be assigned to those partitions, you must first determine how many partitions (1-2) are required.
Following are some facts you need to know about partitioning.

Keypads

Each keypad must be given a unique "address" and be assigned to one partition.

Zones

Each zone must be assigned to one partition. The zones assigned to a partition will be displayed on that partition’s
keypad(s).

Users

Each user may be given access to one or more partitions. If a user is to operate more than one partition and would like
to arm/disarm all or some of those partitions with a single command, the user must be enabled for Global Arming for
those partitions (when entering user codes).

A user with access to more than one partition (multiple access) can "log on" to one partition from another partition’s
keypad, provided that program field 2*18: Enable GOTO is enabled for each partition he/she wants to log on to from
another.

Setting-Up a Partitioned System

The basic steps to setting up a partitioned system are described below. If you need more information on how to program
the options, see

SECTION 4: Programming

.

1. Determine how many partitions the system will consist of (programmed in field 2*00).

2. Assign keypads to partitions (

Device Programming

in the

#93 Menu Mode

).

3. Assign zones to partitions (

Zone Programming

in the

#93 Menu Mode

).

4. Confirm zones are displayed at the keypad(s) assigned to those partitions.

5. Assign users to partitions.

6. Enable the GOTO feature (program field 2*18) for each partition a multiple-access user can log on to (alpha keypad

only).

7. Program partition-specific fields (see the

Data Field Descriptions

section).

«
...
7
8
9
10
11
...
»

Содержание ADEMCO VISTA-40

































































































Отзывы:

Нет отзывов

Похожие инструкции для ADEMCO VISTA-40

Бренд: Gas Clip Technologies Страницы: 16

Бренд: i-PRO Страницы: 12

Бренд: i-PRO Страницы: 27

Бренд: Walabot Страницы: 9

Бренд: i-PRO Страницы: 24

Бренд: i-onik Страницы: 59

Бренд: M-Audio Страницы: 12

Бренд: Nady Systems Страницы: 8

Pure Link 1300 Series

Бренд: lancer Страницы: 20

Бренд: Eneo Страницы: 16

Бренд: Vega Absolute Страницы: 26

Бренд: TAD Страницы: 2

Бренд: EAW Страницы: 2

Бренд: Gentec-EO Страницы: 28

Бренд: R-Tech Страницы: 24

Бренд: aqprox! Страницы: 41

Бренд: Eminent Страницы: 12

Бренд: GPX Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды