ACUIX
TM
ES Installation and Configuration Guide
Document 800-01949 Rev D
63
05/09
Configuring Privacy Zones
Note
When setting up privacy zones with the Sony FCB EX-45C camera, the
coordinates displayed on screen prior to saving increase by four times (4x)
once saved. In other words, a 1x1 square on screen is saved and displays as
a 4x4 square for that privacy zone.
Resetting a Privacy Zone Password (Diamond or IntelliBus Only)
•
If a unit is sent to a preset and any portion of a privacy zone would be visible while
traveling to the preset, the video is masked with a box where any portion of a privacy
zone is visible.
•
To prevent any privacy zones being visible if the dome loses power, the video is
blanked upon power-up until the dome finds home.
Table 3-5
Privacy Zone Functions
Task/Action with Default
Notes
Programming a Privacy Zone
1.
Position the dome so the area to be covered by
the privacy zone is on the monitor.
2.
Select
6 Function Programming
>
6 Program
Privacy Zone.
3.
Enter the 4 digit PIN. The default is
1000
.
4.
Select a privacy zone number between 1 and 24
to assign the area.
5.
Press
Focus Far (-)
to switch to PTZ mode to gain
control over the joystick. Adjust the coordinates of
the privacy zone as required using the joystick
and moving it up or right to create a mask/box.
The tilt cannot be greater than 70
°
and the zoom
cannot be more than 1x.
6.
Press
Focus Near (+)
to switch to menu mode to
access the controller keyboard.
Press Iris Open
(+)
to save the coordinates.
7.
Program another privacy zone or exit.
•
This menu is not available with IntelliBus protocol.
•
Privacy zones are assigned a priority between 1
and 24 in the order programmed. For example, if
user programs Zone 24 before Zone15, Zone 24 is
a
Priority 1
and Zone 15 is a
Priority 2.
•
If a privacy zone is disabled, it does not display on
the PTZ Priority Menu.
•
When a privacy zone is enabled, it is assigned the
highest unused priority available.
•
Up to 24 privacy zones can be programmed.
•
For the Sony FCB EX-45C camera, the
coordinates displayed on screen prior to saving
increase by four times (4x) once saved. In other
words, a 1x1 square on screen is saved and
displays as a 4x4 square for that privacy zone.
Changing the Privacy Zone Mask Color
1.
Select
6 Function Programming
>
3 Privacy
Zone Options
>
3 Privacy Zone Color
.
2.
Select the color of the mask,
Black
,
Grey
or
White
.
Содержание ACUIX ES
